Back to blog

How to document a fixed asset write-off in Poland, with a Word template

Download a fixed asset disposal report for a Polish limited company. Follow a damaged machine from write-off through collection, journal entries and CIT.

Category
Bookkeeping
Updated
Author
Norman

When a Polish limited company permanently retires a piece of equipment, its fixed asset disposal report should identify the item, the reason for taking it out of use and what happened to it. Record the decision date first. Add the date and evidence of dismantling or collection when it happens. Your accountant needs that history even if the asset already has a carrying amount of zero.

Download the editable fixed asset disposal report for Poland (.docx)

Your Polish accountant may call this document a protokół likwidacji środka trwałego. Here likwidacja refers to retiring an individual asset. The company itself continues to trade. The example below follows a Polish sp. z o.o. that keeps full accounting records and pays ordinary corporate income tax (CIT).

When should you open a disposal report?

Suppose a heat sealer breaks down in your packing room. The operator reports the fault and a technician checks whether it can be repaired. Keep the service report. If management is still considering a repair, the technician’s visit alone does not establish a permanent retirement. Open the disposal record when someone with authority makes that decision and can explain why the company has taken this particular machine out of use.

Start by finding out where the equipment is going. Selling a working machine calls for a sale record and evidence of transfer to the buyer. An empty space on the factory floor during a stocktake calls for an investigation into the missing item. Recording scrapping in either situation would leave your accountant with the wrong explanation for the change in the register. Polish National Accounting Standard No. 11, Chapter IX

How do you fill in the template?

  1. Match the item to the register. Enter the company name and address, asset name, inventory number, location and quantity. If two identical sealers sit on the same bench, the serial number helps the technician and the accountant identify the same machine. Give the report its own reference so that someone looking at the ledger can find the supporting document.
  2. Explain the decision. Identify the failed component or describe the wear, summarise the technician’s findings and state why the company decided against a repair. Enter the decision date, the person who approved it under the company’s procedures and the proposed disposal method. Keep the preparation date as well if the document was written up later.
  3. Reconcile the figures. Take the original cost, accumulated book depreciation and net carrying amount at retirement from the asset record. Check for any previous impairment charge. The supplier’s invoice can help identify the purchase, but it will not show depreciation already charged or improvements capitalised after purchase.
  4. Complete the handover section after the event. Enter the actual date, method and people involved. Identify any external recipient by name and address and include the receipt reference. List components kept for reuse and any scrap recovered. If a collector has only booked a slot, leave this section open for the colleague who will see the machine leave.
  5. Leave a trail back to the ledger. Attach the technician’s assessment, the applicable handover or disposal evidence and any other document mentioned in the report. Have accounting record the posting period, treatment and entry reference according to the company’s process. Put the report number on separately stored attachments so that the file can be reconstructed at year-end.

Adapt the signature fields to the people who actually authorise retirement, release equipment and take delivery. If your team works in English, agree with your Polish accountant which version to keep in the file. An auditor or inspecting authority can require a reliable Polish translation of specified foreign-language evidence. Polish Accounting Act, Articles 20 and 21, including Article 21(5)

What if the decision and collection fall on different dates?

On 4 November, the technician identifies a faulty heating module. On 9 November, an authorised manager permanently retires heat sealer ST-014. On 17 November, a scrap contractor collects it and issues a receipt. The first date explains how the company learned about the fault. The second records the decision. The third shows when the contractor took possession. A colleague reviewing the file can now account for the eight days the retired machine spent in the company’s packing room.

Under the treatment described in National Accounting Standard No. 11, the documented decision to retire an asset for disposal takes it off the balance sheet. The company tracks the item in an off-balance-sheet record until physical disposal. A receipt that confirms only collection should be recorded as such. Establish what evidence will close the disposal record. The standard also covers cases where physical removal cannot be justified economically or carried out technically. National Accounting Standard No. 11, paragraphs 9.5 to 9.8

What are the journal entries for a partly depreciated machine?

ST-014 originally cost PLN 24,000. Its accumulated book depreciation at retirement is PLN 18,000. There have been no impairment charges, leaving a carrying amount of PLN 6,000. The accountant matches all three figures to this machine’s inventory number before posting the disposal.

Ledger entryDebitCredit
Accumulated depreciation on the heat sealerPLN 18,000
Other operating expense on disposalPLN 6,000
Machinery at original costPLN 24,000

The entry clears the historical cost and accumulated depreciation for ST-014. It assumes there is no dismantling charge or scrap recovery in these figures. If the contractor charges for collection, retain its invoice. If it pays the company for scrap, keep the settlement document. A handover receipt can identify exactly which machine left the premises without telling the accountant who owes whom money.

If ST-014 had already been fully depreciated in the books, the disposal entry for the asset itself would clear PLN 24,000 on each side with no remaining carrying amount to expense. A fully depreciated machine still being used to seal orders stays on the register. The guide to fixed asset depreciation in Poland explains the schedule that gives you the opening figures for this check.

Does the PLN 6,000 also qualify for a CIT deduction?

For ordinary Polish CIT, start with the tax depreciation record and the actual reason for disposal. Your company may have depreciated the same machine at different rates for tax and financial reporting. The portion of the loss already covered by tax depreciation is excluded from tax costs. Polish law also excludes a loss on disposal of a partly depreciated asset if it lost its economic usefulness because the company changed its type of business activity. Polish CIT Act, Articles 15(1), 16(1)(5) and (6), and 16h(1)(1)

If your company continues packing the same products and the heating module is no longer available, put those facts in the file. A decision to stop manufacturing altogether and become a consultancy would need a different explanation. With the reason and the tax register in hand, the accountant can assess whether any remaining tax loss is deductible, what evidence supports it and which period it belongs in.

What should you send the accountant?

Send the signed report, service assessment, collection evidence and a list of any parts the business kept. Include the asset ID and report number in your message. If the contractor will send a separate destruction certificate, record who will follow up. At your company’s year-end close, someone else should be able to establish why the machine is missing from the list of operating equipment and whether any paperwork is still outstanding.

If you use Norman, open the asset record to compare original cost with its book and tax depreciation schedules. The Polish-market help guide describes how the register handles depreciation and the remaining carrying amount on disposal. The company supplies the decision and evidence of the physical outcome. Fixed assets and depreciation in Norman

Frequently asked questions

What goes in a fixed asset disposal report in Poland?
Identify the company, document and asset. Record the decision date, reason, register values and disposal method. Add the date and evidence of the work once completed. Identify the people who authorised and confirmed the disposal and cross-reference the accounting entry.
How do you dispose of a fully depreciated asset?
Keep equipment on the register while the company still uses it. When it is permanently retired, document the decision and what happened to the asset. If its book value is zero, remove its original cost and the matching accumulated depreciation. Record any collection charge or recovered material separately.
How should a company record the destruction of an asset?
State what happened, where and when, and who witnessed or confirmed it. Name the contractor and reference its receipt if someone collected the asset. A collection receipt documents handover. Record a destruction date when you have evidence of that event.

Check the asset you plan to write off

Compare the original cost and accumulated depreciation on the asset record in Norman with the figures in your company’s disposal report.